DriveDx is advanced drive-health diagnostic and monitoring utility. Save yourself from data loss and downtime that is associated with unexpected drive failures. Don't worry about losing your important data, music, and photographs. 

Advanced Drive Health Diagnostics
Regular diagnostic tools simply check the built-in S.M.A.R.T. status of the drive, which provides the user with little information about the actual state of the physical drive. As opposed to such tools, DriveDx analyzes the current state of the drive using all the drive health indicators that are most likely to point to a potential drive issue (for instance, SSD wear out / write endurance, I/O errors, pending sectors, reallocated bad sectors, etc).

Drive Failing (Pre-fail) State Detection
Unlike most other tools, DriveDx detects not only “OK/Verified” and “Failed” drive health states, but also the “Failing (Pre-fail)” drive state. Thanks to that, you will detect problems much earlier than when using any other SMART monitoring utilities. This means that you have more chances to save your critical data before any data loss actually occurs.

Real-time Drive Health Monitoring
DriveDx runs in the background and periodically performs checks to determine the health of your SSD or HDD. When any issue or problem is found, it alerts you immediately. DriveDx acts as an “early warning system” for pending drive problems. As a result, you have more chances to save your critical data before any data loss actually occurs.

Early Warning System
DriveDx features a special multi-tier warning system that will inform the user about deviations from the normal state of drive attributes. It constantly monitors each S.M.A.R.T. attribute (and its change dynamics) and starts continuously warning the user as the drive degrades. On the initial stages of drive degradation, the user will receive notifications of the Warning type, then Failing (means that this drive parameter is in a pre-failure state) and only then Failed.

Drive Self-tests
DriveDx allows you to start and control diagnostic self-tests of SSD / HDD. The primary goal is to quickly identify if the drive is faulty. Usually self-tests consist of a collection of test routines like electrical and/or mechanical performance tests as well as the read performance test of the drive. Depending on self-test type it does read scan of a small area or the entire media.

Modern SSDs and HDDs Support
When evaluating the state of various drives, DriveDx can use different heuristic algorithms depending on the drive model and even its firmware version. One of the key advantages of the software is that the state of HDD and SSD drives is assessed using different algorithms, since many state indicators of HDD drives are not applicable or make no sense for SSD drives.

Automatic E-mail Reports
The user can get problem notifications and drive status reports to email. Reporting can be configured on the basis of various criteria. Thanks to this feature, the user does not need to have physical access to a specific computer all the time, which is especially useful for all kinds of server rooms, data centers, etc.

A modern, good-looking and user-friendly interface
DriveDx is one of the first drive diagnostic tools created in the true Mac style. All interface elements are clear and intuitive, so it will only take you a few minutes to learn the basics and start using the program. When a problem is identified, you will see a notification on the desktop and the status bar will show the status of your drives.

Drive Key Metrics Evaluation
DriveDx calculates various ratings of the current status of key drive characteristics (percent values):
- Drive health rating
- Drive performance rating
- SSD lifetime left indicator (in case of an SSD drive)

Requirements: Intel, OS X 10.6.8 or later

Home Page - http://binaryfruit.com/drivedx